Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that prevents loss of heat in winter and helps to keep your home cool in the summer. Restoring your double-glazed windows as necessary is a great way to ensure they remain in good condition.

Over time, condensation and misting can affect your double-glazed windows. This can cause your double-glazed windows to be difficult to open or shut.

Broken Panes

A unruly ball or a stone flying from your lawnmowers or a storm that is strong enough can break the double pane windows of your home which can expose your home to the elements. While a damaged window may be difficult to repair however, you don't have to have it replaced entirely. In fact the insulated glass between the two panes remains in good condition, and you can fix your double-pane window using a bit of DIY effort.

To start, you'll need to remove the broken glass from the frame. Be careful to keep glass shards from falling onto the floor or sliding from the frame. Make sure you wear work gloves to shield your hands from injury and a rag to protect the area surrounding the broken glass to avoid further damage or breaks. After you have removed the broken glass clean the frame of the window thoroughly, removing any sealant or other debris. Sand rough areas of the frame to create a smooth and even surface to put in your new glass.

After cleaning the frame, you can apply a fresh layer of glass to the area where the damaged pane was removed. This is the best method to seal and protect your window. It will also reduce your energy bills by preventing drafts and water from entering the home. Next, you will need to select your glazing material. There are a variety of options including clear tape which is more durable than regular tape and prevents further cracking of your window or glazing film, which is similar to clear plastic wrapping. This option has the advantage that it can be painted to match your frame and can also shield your windows from the elements like ice and rain.

Whatever material you decide to use it is important to press the glaziers points into that seam where the putty meets your frame. They will help hold the glass in place, and aid in adhering to the frame. Glazier's points can be found in hardware stores, and they are available in pre-made ropes which you roll onto the frame rabbets.

Condensation

Double glazing can be prone to condensation issues. If you experience this problem it is recommended to contact the company that installed the window. Many have warranties and guarantees to address the issues. Fogging or condensation on the panes of your windows is a sign that your seals are damaged. Only an expert can fix this issue by replacing both panes.

It's a complicated procedure that requires specialized tools to remove and replace the window. A professional can handle this job and provide the equipment. It is recommended to leave the work to an expert. These tools can be hazardous.

Wear safety gloves and glasses if decide to do it yourself. You could be exposed to flying glass fragments. It is important to take out any putty or metal glazing points from the grooves that will receive the new window. Wire-brushing the frame or vacuuming it with a damp cloth are also recommended. Once the frame has dried it is time to order an additional piece of glass that is 1/8" shorter in both directions than your existing window. Check the glass's fit into the grooves.

You will need to apply a layer silicone caulk into the upvc window repair near me grooves of your frames to ensure the glass you are installing is securely installed. After the silicone caulk is dried, you can smooth it out and make any necessary adjustments. The wood molding can be put back in place.

If the weather abruptly changes, double-glazed windows could be difficult to open and close. Extreme temperatures can cause the frames to expand or shrink and cause them to slide or become stuck. If this is the case you could try wiping down the frames using water and lubricating joints. However, it may be a good idea to call the company who installed your windows to help.

Misunderstood

Misted Double Glazing is a window issue that occurs when moisture gets trapped between the glass panes of your double glazed windows. Double glazing is comprised of two panes of glass that are separated by an insulating area, typically filled with argon gas to provide increased thermal efficiency. This creates a airtight seal that keeps warm air inside and cold air outside.

This seal can fail over time, and moisture can build up between the glass panes, causing them to appear misty. This happens because the sun's heat causes the gap between panes of windows, causing water to evaporate.

This is a natural occurrence, but if it occurs between the panes of the window it can be a problem because it won't be able to regulate the temperature within the room. Instead, the temperature outside the window will affect the temperature inside. If you notice that your double-glazed windows are turning misty, call in the experts at Northfield Glass to investigate.

We can replace the individual sealed blown unit without having to replace the entire window, which is a lot less disruptive than a complete replacement. Our misty glass repair involves removing and cleaning the unit of glass before replacing it with a brand new one. This will result in an airtight seal and will be watertight.

Certain companies in the business claim that they can inject chemicals through holes into windows that have been misty to eliminate the condensation and fog. We do not recommend this method. This is not just ugly, but it can cause damage to the toughened glass and leave you with windows that do not completely perform the function it was intended to.

If you don't take care to fix the problem immediately, it could lead to mould, which could not only harm the window, but cause health risks for your family members. Moisture can also cause issues in your home, such as dampness or rot. In some cases windows, they may have to be replaced entirely.

Failed or Blown

Modern double glazed windows have two glass panes that have an inert gas or air between them. This improves their thermal efficiency, keeping warm air in and cold air out. Over time, the gas may depressurize and cause a variety of problems.

One of the most frequently encountered is condensation between the panes. While it is a natural event, it doesn't necessarily mean that your window has failed, it can be an indication that you need to re-seal your windows. Condensation could also be a sign of a broken double glazing, which could require a re-installation.

You should also look out for draughts that are coming from your double glazed windows. It could be due to a failed seal or a damaged handle or a broken lock. It is essential to fix this problem as soon as you can. A draft will force you to spend more on heating. Test the seals on the window frame by smelling cold air.

Another sign that the seals on your windows have failed is when you start to see water dripping on the inside of your windows. This is an indication that you have to replace the seals on your double-glazed windows.

The frames of your windows are designed to move a bit as they have to do to keep the glass sheets in their place. Over time, this special packaging material could become compressed. This could cause the seal to be broken. This will allow air to circulate between the panes, decreasing your window's energy efficiency.

Double glazing that has ruptured seals is a sign of failure and needs to be repaired as soon as is possible. A damaged seal can stop your double glazing from fulfilling its primary job of keeping cold out and warm inside. Furthermore, a blow-off seal can let moisture in, which can result in mold and other unpleasant conditions. Contact a double-glazing specialist as soon you notice a blown window seal. They can fix the entire unit.